Jiujiang RUYA Precision Technology Co., Ltd
Add to Cart
DT200-C Payload 15kg Single-axis Inertial Navigation Test Turntable
Product Description
A certain equipment needs to be calibrated and tested, and a single-axis test turntable system needs to be configured. The base of the single-axis test turntable is required to be fixed on a vertical steel pipe, and the height of the turntable can be adjusted up and down along the steel pipe. Single-axis turntables are mainly used for angle calibration measurements, including turntable equipment and corresponding control software. In order to facilitate the use of the turntable control software, it is suitable for Windows 7 and above versions, and has computer automatic control, data acquisition, processing and display functions. Users can set operating modes, control parameters, speed and acceleration protection thresholds and other functions.
Product Parameters
| Specification | ||
| 1 | Load Weight | 15Kg |
| 2 | Table Diameter | Ф200mm |
| 3 | Table Flatness | 0.02mm |
| 4 | Table Runout | 0.02mm |
| 5 | Rotary Accuracy Of Axis | ±3″ |
| 6 | Positioning Error Of Angular Position | ±3″ |
| 7 | Positioning Repeatability Of Angular Position | ±2″ |
| 8 | Rate Range | ±0.0001°/s~±200°/s |
| 9 | Rate Resolution | 0.0001°/s |
| 10
| Rate Accuracy
| ω≤1°/s , 2×10-3 (1° average) |
| 1°/s≤ω<10°/s , 2×10-4 (10° average) | ||
| ω≥10°/s , 2×10-5 (360° average) | ||
| 11 | Maximum Angular Acceleration | ≥100°/s² |
| 12 | User Slip Ring | Customizable |
